PVC Additives Dosing Machine

Product Overview

 

The PVC Additives Dosing Machine is an industrial-grade gravimetric batching and feeding system engineered for PVC compounding, pipe, profile, and cable extrusion plants. Positioned directly upstream of high-speed hot/cold mixers or twin-screw compounding lines, this system automates the proportioning of bulk materials (PVC resin, CaCO3) alongside critical minor and micro-additives (stabilizers, lubricants, CPE, pigments, and blowing agents).

 

 
 
Key Features & Benefits

Gravimetric Loss-in-Weight / Gain-in-Weight Architecture:

Dual-mode weighing configuration utilizes high-resolution digital load cells to execute independent micro-dosing and macro-dosing cycles per batch.

Hermetic Pneumatic Conveying Interface:

Fully enclosed vacuum and pressure transfer lines prevent hygroscopic moisture absorption and eliminate fugitive dust emissions during material transfer.

Rapid Clean-Out Design:

Tool-free quick-release screw augers and sanitary hinged access doors reduce color and formulation changeover downtime by up to 60%.

Traceable Recipe Management:

Industrial PLC stores up to 500 distinct compounding formulas, logging actual dispensed weights, batch timestamps, and operator IDs for ISO/IATF compliance audits.

 

Technical Specifications

 

Technical Parameter

Specification Range / Standard

Applicable Materials

PVC Resin Powder, CaCO3, Stabilizers (Lead / Ca-Zn), CPE, ACR, Paraffin Wax, Pigments

Batch Capacity

50 kg to 500 kg per batch (customized to high-speed mixer volume)

Weighing Accuracy

plus-minus 0.1% to plus-minus 0.2% (Full Scale)

Dosing Stations

2 to 12 modular ingredient bins per system

Feed Screw Configuration

Single or twin helical screws (interchangeable diameters: 16 mm to 80 mm)

Load Cell Instrumentation

Mettler Toledo / HBM (Stainless steel, IP67 environmental rating)

Control System Platform

Siemens S7-1200 / S7-1500 PLC with 12-inch color HMI Touchscreen

Industrial Protocols

Profinet, Modbus TCP, Ethernet/IP for plant SCADA integration

Electrical Supply

380V / 415V, 3-Phase, 50/60Hz (customizable to regional grid standards)

Compressed Air Utility

0.6 MPa to 0.8 MPa dry, oil-free instrument air

 

Key Components

 

Weighing Hoppers & Load Cells:

Suspended on industrial shear beam load cells equipped with mechanical overload protection to isolate plant vibration and ensure stable, drift-free weight acquisition.

01

Dosing Screws & Trough Tubes:

Precision-machined stainless steel augers paired with tight-tolerance outer tubes to prevent material slippage and back-feeding of fine powders.

02

Pneumatic Diverter Valves:

Quick-acting butterfly and slide valves driven by heavy-duty pneumatic cylinders to direct metered ingredients into the collective weigh hopper or directly into the mixer inlet.

03

Dust Collection Manifold:

Integrated negative-pressure suction ports connect to central or local baghouse dust collectors, maintaining zero particulate emission during material loading.

04

Electrical Enclosure:

NEMA 4X / IP65 rated control cabinet housing Schneider switchgear, frequency inverters, and isolated analog/digital I/O modules.

05

 

Automatic Dosing System

 

Applications

PVC Pipe & Conduit Extrusion Lines: Automates the batching of rigid PVC resin, calcium carbonate, and compound stabilizers to feed twin-screw extrusion systems.


Window Profiles & Door Panels (WPC/PVC): Manages complex formulations containing stabilizers, impact modifiers, and titanium dioxide for weather-resistant structural profiles.


PVC Cable Compounding Plants: Handles strict micro-dosing of plasticizers, flame retardants, and stabilizers for electrical insulation and sheathing compounds.


Calendered PVC Sheets & Films: Provides high-frequency, repeatable micro-batching required for thin-gauge medical and industrial film manufacturing.

 

 
 
Manufacturing Capabilities & Quality Assurance

Laser Cutting & CNC Bending:

Sheet metal components for hoppers and frames are processed via Trumpf CNC fiber lasers and press brakes, maintaining dimensional tolerances within plus-minus 0.1 mm.

TIG Welding & Surface Passivation:

All stainless steel material-contact surfaces (SUS304 / SUS316L) undergo argon-arc TIG welding followed by mechanical polishing and chemical passivation to eliminate powder adhesion crevices.

Load Cell Calibration Test:

Every dosing module undergoes a 72-hour continuous static and dynamic calibration test using certified test weights traceable to national standards.

Electrical Integration Audit:

Control panels are wired in accordance with UL508A / IEC 60204-1 standards, followed by full PLC logic simulation and dry-run I/O testing prior to crating.

 

 

Customization Options

Ex-Proof (ATEX / Class I Div 2): Explosion-proof motors, intrinsically safe barriers, and grounded stainless steel conduits for handling volatile additives or explosive dust environments.


Loss-in-Weight Continuous Feeding: Upgrades from batch weighing to continuous gravimetric loss-in-weight feeders for direct inline feeding into high-output compounding extruders.


Central Vacuum Loading Integration: Automatic refilling of individual additive storage bins from floor-level bulk bags (FIBC/Big Bags) or silo storage.


Multi-Floor Plant Layout Engineering: Custom vertical or horizontal configurations engineered to match existing factory ceiling heights and plant footprints.

Small Ingredient Dosing Machine

 

 
Delivery & After-Sales Support
 
01/

Modular Packaging & Shipping: Dismantled into sub-assemblies and secured in fumigated plywood crates with moisture barrier wrapping for international container transport.

02/

Documentation Package: Supplied with complete English documentation including Electrical Schematics (EPLAN format), P&ID diagrams, PLC source code backup, Component Datasheets, and Maintenance Manuals.

03/

Remote & On-Site Commissioning: Virtual remote setup supported via secure VPN (TeamViewer / eWON) alongside optional on-site mechanical installation supervision and process training by senior commissioning engineers.

04/

Spare Parts Availability: Critical wear items (auger screws, shaft seals, load cell cables, pneumatic solenoids) stocked locally or dispatched within 48 hours globally.

 

 

Frequently Asked Questions

 

 

Q: How does the system prevent bridging and clogging of fine PVC stabilizers and calcium carbonate?

A: Ingredient hoppers feature internal vertical agitation paddles driven by variable-frequency gear motors to break up cohesive forces and prevent powder compaction. Additionally, the discharge zone incorporates fluidizing air nozzles or internal wall scrapers to ensure consistent, uncompressed material flow into the feed screws without rat-holing.

Q: What is the minimum batch size and dosing accuracy for micro-additives like pigments or lubricants?

A: For micro-additives requiring small batch weights (e.g., 0.5 kg to 5 kg), we configure dedicated small-diameter micro-dosing screws (16 mm to 25 mm) paired with high-resolution digital load cells. This setup achieves a stable operational weighing accuracy of plus-minus 0.1% to plus-minus 0.2% of full scale, eliminating formula drift.

Q: Can this dosing machine integrate with our existing plant SCADA or ERP system?

A: Yes. The standard control architecture runs on Siemens S7 series PLCs supporting open industrial communication protocols including Profinet, Modbus TCP, and Ethernet/IP. This allows seamless data exchange with upper-level MES or ERP systems for recipe downloading and automated batch-report extraction.

Q: What are the electrical and utility requirements for installation?

A: The system requires a standard 3-phase industrial power supply (380V / 415V, 50/60Hz, or customized per destination voltage) and a compressed air supply at 0.6 to 0.8 MPa via a dry, oil-filtered line to operate pneumatic actuators. Total connected power typically ranges from 3 kW to 12 kW depending on the total number of stations.

 

modular-1
Request a Quote

To configure a PVC Additives Dosing Machine tailored to your plant's extrusion output, formula requirements, and factory layout, please provide our engineering team with the following parameters:
Target extruders or high-speed mixer model / capacity
Number of main components and minor additives to be dosed
Required hourly throughput or batch cycle time
Plant layout constraints (maximum available height and floor space)

As one of the most professional pvc additives dosing machine manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to buy cost-efficient pvc additives dosing machine for sale here from our factory. Contact us for custom service and OEM service. pvc additives dosing machine, Automatic Dosing System, Small Ingredient Dosing Machine

whatsapp

Phone

E-mail

Inquiry