High Speed Mixer
Product Overview
The Industrial High-Speed Mixer is engineered for high-intensity dry blending, rapid powder dispersion, and thermal-mechanical processing of powders, granules, and shear-sensitive materials. Built around a precision-balanced, high-shear impeller assembly rotating at peripheral speeds up to 40 m/s, the unit breaks down soft agglomerates and achieves uniform dispersion within short batch cycles (3 to 8 minutes).
Key Features & Technical Benefits
High-Shear Impeller Geometry:
Multi-tier angled blade design creates a three-dimensional vortex flow pattern, lifting material along the vessel wall and driving it downward into the shear zone to eliminate dead zones.
Tight-Tolerance Vessel Manufacturing:
Internal vessel walls are precision-rolled, ground, and polished to Ra <= 0.4 um (or mirror-polished optional), preventing material buildup and facilitating rapid batch cleaning.
Integrated Temperature Control Jacket:
Double-wall jacket design accommodates heating or cooling media (steam, hot water, or chilled water) to maintain strict exothermic or endothermic reaction temperature limits during processing.
Pneumatic Flush-Bottom Discharge:
Fast-acting pneumatic discharge valve sits flush with the vessel floor, eliminating dead pockets where unmixed material can accumulate between batches.
Technical Specifications
|
Parameter |
Specification Range / Standard Model (HSM-500) |
|
Total Vessel Volume |
500 L |
|
Working Volume |
350 L (70% filling coefficient) |
|
Main Motor Power |
55 kW / 380V, 50Hz, 3-Phase (Siemens / ABB standard) |
|
Main Spindle Speed |
0 to 980 RPM (Inverter-controlled via VFD) |
|
Peripheral Tip Speed |
Up to 38 m/s |
|
Mixing Vessel Material |
Contact parts: SUS316L; Non-contact parts: SUS304 / Structural Carbon Steel |
|
Internal Surface Finish |
Mirror polished, Ra <= 0.4 um |
|
Shaft Sealing System |
Multi-lip labyrinth seal with pneumatic barrier air purge |
|
Discharge Valve |
Pneumatically actuated flush-bottom valve |
|
Control System |
Siemens PLC + HMI Touch Screen (Recipe storage, interlock safety) |
|
Installed Dimensions |
2400 x 1600 x 2800 mm |
|
Approximate Weight |
3200 kg |

Mixing Vessel (Bowl): Fabricated from heavy-gauge (10 to 16 mm) stainless steel plate with external stiffening ribs to withstand internal thermal and mechanical stress.
Main Impeller & Drive Shaft: Forged alloy steel shaft coupled with dynamically balanced, wear-resistant cast stainless steel mixing blades (surface hardened with tungsten carbide coating available).
Drive Assembly: Helical-bevel heavy-duty industrial gearbox coupled to an explosion-proof inverter-duty electric motor via high-torque coupling.
Pneumatic Actuation Unit: Solenoid valve islands, air filters, regulators, and heavy-duty pneumatic cylinders controlling the discharge valve and cover lid lift mechanisms.
Electrical Control Enclosure: NEMA 4X / IP65 stainless steel panel housing Schneider/Siemens switchgear, Schneider safety relays, and inverter drives.
Applications
Polymer Compounding:
Dry blending of PVC resin, plasticizers, stabilizers, lubricants, and pigments prior to extrusion or pelletization.
Battery Materials:
Homogeneous dry mixing of lithium-ion cathode precursors (NMC, LFP) and anode additives under strict contamination-free protocols.
Chemical Powders & Pigments:
Rapid dispersion of high-viscosity color concentrates, dry paint pigments, and specialized chemical formulations.
Food & Pharmaceutical Premixes:
Uniform blending of dry active pharmaceutical ingredients (APIs), excipients, and nutritional powders under cGMP-compliant sanitary standards.
Manufacturing Capabilities & Quality Assurance
Plate Cutting & Forming:
CNC laser cutting and four-roll plate bending ensure precise cylindrical shell tolerance and seamless welding alignment.
Welding Standards:
All pressure vessel and product-contact welds are executed by certified TIG welders, followed by 100% weld inspection (visual, dye penetrant inspection [DPI], and hydrostatic pressure testing at 1.5x working pressure).
Dynamic Balancing:
Every assembled impeller and shaft assembly undergoes ISO 1940 Grade G2.5 dynamic balancing to minimize operational vibration and bearing wear.
Traceability & Documentation:
Full Material Test Reports (MTRs / EN 10204 3.1 certificates) provided for all stainless steel pressure parts and forged shafts.
Vessel Construction: Alternative metallurgy available including Titanium, Hastelloy, or Monel for highly corrosive chemical environments.
Wear Protection: Tungsten carbide thermal spray coating or ceramic tile lining on blades and vessel interior for abrasive mineral applications.
Heating/Cooling Configurations: ASME-certified pressure jackets rated up to 0.6 MPa operating pressure.
Vacuum Operation: Internal sealing upgrades to support vacuum drying or degassing during the mixing cycle (-0.09 MPa).
Automation Level: Integration into existing plant Distributed Control Systems (DCS) via Profinet, Modbus TCP, or Ethernet/IP communication protocols.

Delivery & After-Sales Support
Factory Acceptance Testing (FAT): Buyers are invited for witnessed or virtual run-tests using client-supplied raw materials prior to crating.
Packaging & Logistics: ISPM 15 compliant heat-treated fumigated wooden crates with internal desiccant packing and shock indicators for international ocean/air freight.
Installation & Commissioning: On-site installation supervision, mechanical alignment, PLC commissioning, and operator training conducted by factory-certified service engineers.
Spare Parts Availability: Standard wear items (shaft seals, bearings, V-belts, proximity sensors) stocked locally for immediate dispatch.
Frequently Asked Questions

Request a Quote
To receive an accurate technical proposal and commercial quotation tailored to your plant requirements, please provide our engineering team with the following parameters:
Material bulk density and particle size distribution (D50).
Target batch weight or volume per cycle.
Desired processing temperature and heating/cooling media availability.
Power supply parameters (Voltage / Frequency / Phase).
Submit Technical Inquiry / Request Engineering Datasheet












