Industrial Crushers
Product Overview
Engineered for continuous heavy-duty operations in open-pit mining, aggregate quarries, and mineral processing facilities, our industrial crushers deliver high reduction ratios and dependable volumetric throughput. Designed around finite-element-optimized (FEA) structural steel frames and heavy-forged alloy steel eccentric shafts, these systems withstand severe impact shock loads when processing high-abrasion ores and hard rock. Available in stationary, modular skid, and track-mounted configurations to match specific plant flowsheets.
Key Features & Benefits
Low-Stress Annealed Main Frames:
Main frames are fabricated from low-carbon structural steel plates and undergo thermal stress-relieving heat treatment post-welding to eliminate residual stresses, preventing micro-cracking under cyclic dynamic loads.
High-Inertia Cast Steel Flywheels:
Balanced flywheels store maximum kinetic energy during peak load spikes, stabilizing motor amperages and preventing operational stalls when encountering unyielding material.
Centralized Pressure Lubrication:
Circulating filtered oil lubrication systems for eccentric bearings maintain optimal operating temperatures, continuously flush contaminants, and extend bearing service life.
Optimized Nip Angle Kinematics:
Crushing chamber geometry utilizes steep nip angles that grip run-of-mine feed securely, eliminating slippage, reducing crown wear, and maximizing throughput per installed kilowatt.
Technical Specifications
|
Parameter |
Primary Jaw Crusher (Model: JC-1060) |
Heavy-Duty Impact Crusher (Model: IC-1312) |
|
Feed Opening Dimensions |
1000 mm x 600 mm |
1300 mm x 1200 mm |
|
Max. Feed Size |
500 mm |
500 mm (Soft to Medium Abrasive) |
|
Throughput Capacity |
150 - 320 tph |
200 - 400 tph |
|
Discharge Setting (CSS) |
75 mm - 200 mm (Hydraulic/Shim) |
30 mm - 120 mm (Adjustable Apron) |
|
Recommended Motor Power |
110 kW |
250 kW |
|
Eccentric Shaft Speed |
250 RPM |
550 - 700 RPM |
|
Total Operating Weight |
24,500 kg |
31,000 kg |
|
Wear Part Metallurgy |
ASTM A128 Gr. C12 (Mn 18% - 22%) |
High-Chrome Iron (Cr 26% / Ceramic Insert) |

Forged Alloy Main Shafts: Forged from 42CrMo chromium-molybdenum steel, ultrasonically tested per ASTM A388 for internal structural integrity, and precision-machined on CNC horizontal boring mills.
Crushing Jaw Dies & Blow Bars: Cast in austenitic manganese steel (up to 22% Mn) that work-hardens under high compressive impact, or high-chromium white iron for abrasive, low-silica aggregate processing.
Heavy-Series Roller Bearings: High-capacity double-row spherical roller bearings rated for severe dynamic loads, protected against dust and moisture ingress by multi-lip labyrinth grease seals.
Toggle Plates & Seats: Precision-machined ductile iron or cast iron safety components engineered to act as predictable mechanical fuses during uncorrectable over-torque events.
Heavy-Duty Power Transmissions: Multi-groove SPB/SPC V-belt drives coupled with totally enclosed fan-cooled (TEFC) IP55 high-efficiency electric motors.
Applications
Metal Ore Mining & Beneficiation:
Primary crushing run-of-mine (ROM) gold, copper, iron ore, and polymetallic sulfides prior to semi-autogenous (SAG) grinding or secondary cone crushing stages.
Aggregate Quarries:
Production of railway ballast, high-specification concrete aggregates, and dense bituminous road base materials from quarried granite, basalt, and diabase.
Recycling & Demolition:
Processing reinforced concrete, reclaimed asphalt pavement (RAP), slag, and industrial demolition rubble to recover scrap steel and produce certified recycled aggregate.
Manufacturing Capabilities & Quality Assurance
Machining Infrastructure:
Heavy structural components are machined on 16-meter CNC floor boring mills, maintaining bearing seat parallel alignment and bore concentricity tolerances within 0.02 mm.
Welding Standards & Compliance:
All structural welding executed by certified welders qualified to AWS D1.1 / EN ISO 9606, utilizing low-hydrogen electrodes and ultrasonic/magnetic particle inspection.
Rigorous NDT Protocols:
100% Non-Destructive Testing (Magnetic Particle Testing - MT; Ultrasonic Testing - UT) applied to critical weldments, forged eccentric shafts, and swing jaw stocks.
Factory Acceptance Testing (FAT):
Every assembled unit undergoes a mandatory 4-hour no-load running test. Bearing housing temperature rise, lubrication pressure, and vibration velocity are monitored and logged against ISO 10816 standards.
Power & Drive Layouts: Direct electric motor drives, dual-motor configurations, or diesel-hydraulic power packs for remote off-grid mining sites.
Chamber Customization: Quarry profile (deep tooth) jaw plates for hard rock vs. corrugated profile jaw plates for high-fines recycling applications.
Feed & Discharge Chutes: Wear-resistant hopper linings featuring replaceable AR400 / AR500 wear plates and integrated dust suppression water manifolds.
Automation & Instrumentation: Integrated PLC control panels featuring real-time motor amperage tracking, automated hydraulic CSS adjustment, and bearing temperature/vibration telemetry.

Delivery & After-Sales Support
Export Packaging: Bare-machined surfaces coated with rust preventative and sealed with vapor corrosion inhibitor (VCI) film; loose components packed in ISPM 15 heat-treated timber crates suited for break-bulk ocean transport.
On-Site Engineering Services: Factory-trained mechanical engineers available for foundation alignment supervision, mechanical erection, cold commissioning, and operator training.
Global Spare Parts Logistics: Dedicated stock of critical wear components (jaw dies, toggle plates, wedge blocks, bearing assemblies) maintained for rapid international dispatch.
Frequently Asked Questions

Request a Quote
To initiate an accurate technical evaluation and formal commercial quotation for your plant, please provide the following parameters to our application engineering team:
Raw Material: Raw material description, bulk density, compressive strength (MPa), and Bond work index.
Feed & Output Requirements: Maximum feed size and required target output product size (CSS).
Target Throughput: Target hourly throughput requirement (tph).
Plant Installation Type: Plant installation type (stationary footprint, mobile tracked chassis, or underground station).
















