Extrusion Machine
Product Overview
This industrial extrusion machine transforms thermoplastic raw materials (LDPE, HDPE, PP, PVC, ABS) into continuous profiles, pipes, and sheets. Engineered for 24/7 continuous manufacturing, the system integrates a high-torque gearbox, a nitrided alloy steel screw, and a modular temperature-control architecture to maintain consistent melt pressure and output rates across long production runs.
Key Features & Benefits
High-Torque Reduction Gearbox:
Hardened helical gears manufactured from 20CrMnTi deliver a service factor above 1.6, handling high back-pressures without overheating or premature bearing fatigue.
Optimized Barrier Screw Geometry:
Specialized mixing and shearing sections ensure uniform polymer melting and pigment dispersion at lower shear rates, preventing thermal degradation of heat-sensitive resins.
Closed-Loop Barrel Cooling:
Cast-aluminum heaters paired with low-noise centrifugal blowers maintain zone temperature regulation within plus/minus 1 degree Celsius.
Energy-Efficient Drive System:
Direct coupling of the AC inverter-duty motor eliminates mechanical transmission losses, reducing specific energy consumption (kWh/kg) by 12% compared to traditional belt-drive setups.
Technical Specifications
|
Parameter |
Standard Model (SJ-90) |
Heavy-Duty Model (SJ-120) |
|
Screw Diameter |
90 mm |
120 mm |
|
Screw L/D Ratio |
33:1 |
38:1 |
|
Max. Screw Speed |
120 rpm |
90 rpm |
|
Main Motor Power |
75 kW |
160 kW |
|
Barrel Heating Zones |
6 Zones |
8 Zones |
|
Heating Capacity |
36 kW |
64 kW |
|
Max. Output Capacity* |
250 - 320 kg/h (HDPE) / 200 - 260 kg/h (PVC-U) |
500 - 650 kg/h (HDPE) / 420 - 540 kg/h (PVC-U) |
|
Gearbox Torque Rating |
3150 N*m |
6800 N*m |
|
Control Interface |
Siemens PLC + 10-inch HMI |
Siemens PLC + 15-inch Touch Panel |
Note: Output capacity varies depending on polymer melt flow index (MFI), bulk density, and specific tooling geometry.
Key Components
Screw & Barrel:
Forged from 38CrMoALA alloy steel, gas-nitrided to a depth of 0.5 - 0.7 mm with a surface hardness of HV 900-1000. Bimetallic lining options available for abrasive fillers (e.g., 30% glass fiber or CaCO3).
Gearbox Housing:
Cast iron (HT250) stress-relieved via annealing, precision-machined on CNC floor-boring mills to ensure strict shaft alignment and zero gear backlash.
Electrical Switchgear:
Schneider contactors, RKC/Omron solid-state temperature controllers, and ABB/Inovance frequency converters installed in a dust-tight, forced-ventilation electrical cabinet built to UL 508A standards.
Vacuum Venting Port:
Single or dual-stage vacuum degassing chamber removes trapped moisture and volatiles during processing without polymer backflow.

Pipe Extrusion: Municipal water supply pipes, gas distribution pipes, and corrugated cable conduits (OD 20 mm - 630 mm).
Profile Extrusion: Window and door frames, cable trunking, architectural trims, and rigid industrial channels.
Sheet & Board Line: Thermoplastic solid sheets and foam boards utilized in packaging, automotive interiors, and construction formwork.
Masterbatch & Compounding: Polymer modification, color masterbatch pelletizing, and filler blending lines.
Manufacturing Capabilities & Quality Assurance
Machining Precision:
Barrel inner bores are deep-hole bored and honed to a surface finish of Ra 0.4 um, ensuring tight radial clearance between screw flights and barrel walls.
Weld Inspection:
All pressure-bearing structural weldments undergo ultrasonic testing (UT) and magnetic particle inspection (MT) per AWS D1.1 standards.
Factory Run-Test:
Every machine undergoes a strict 8-hour no-load hot run and a 4-hour full-load material test using virgin HDPE before crating, verifying amperage draw, melt temperature stability, and vibration levels.
Compliance Certification:
CE certified, ISO 9001:2015 quality management system, and optional UL/CSA electrical panel certification for North American compliance.
Drive Configuration: Servo motor upgrades for high-viscosity engineering plastics or custom multi-axis co-extrusion setups.
Barrel Metallurgy: Tungsten carbide alloy spraying or spray-welded bimetallic layers for processing abrasive glass-filled or flame-retardant compounds.
Feeding Systems: Gravimetric loss-in-weight dosing blenders integrated directly into the machine control architecture.
Voltage Adaptation: Custom electrical configurations built for 380V / 50Hz, 480V / 60Hz (with UL/CSA approval), or specialized industrial grids (600V).

Delivery & After-Sales Support
Packaging & Logistics:
Anti-corrosion vacuum barrier wrapping, desiccant saturation, and secure ISPM 15 heat-treated wooden crating suitable for ocean freight and container lashing.
Commissioning Support:
Detailed mechanical/electrical installation drawings, remote video diagnostic assistance, or optional on-site commissioning by factory service engineers.
Spare Parts Availability:
Critical wear items—including heater bands, thermocouples, seal kits, and specific screw segments—stocked in distribution hubs for rapid dispatch.
Frequently Asked Questions

Request a Quote
To receive a technical proposal and formal quotation tailored to your resin type and target output rate, please provide the following details:
Target polymer material and melt flow index (MFI)
Desired product geometry (pipe diameter, sheet thickness, or profile drawing)
Required hourly output (kg/h)
Local electrical grid specifications (V / Hz / Phase)
















