Ribbon Mixer

Product Overview

 

The Industrial Ribbon Mixer operates via a counter-current dual-helix agitator configuration within a stationary U-shaped trough. The outer ribbon pushes material from the ends toward the center, while the inner ribbon conveys material from the center to the ends. This opposing axial movement generates fluid shear and radial displacement, achieving a typical coefficient of variation (CV) under 3% for standard bulk powders.


Built for continuous duty in chemical, food, and powder metallurgy plants, the unit handles bulk densities up to 1.8 kg/L with viscosities ranging from free-flowing granules to cohesive powders. To streamline project engineering, comprehensive 3D/2D CAD models and integration data packages are supplied pre-order, ensuring seamless alignment with your facility layout and existing plant piping/structural interfaces.

 

 
 
Key Features & Benefits

Dual-Helix Convection Design:

Interlocking outer and inner ribbon blades eliminate central stagnation zones, ensuring complete radial and axial turnover across the entire batch volume.

Positive Shaft Sealing Architecture:

Multi-stage seal assemblies combine air-purge barriers with tungsten carbide mechanical faces or split-packing glands, preventing material migration into bearing housings.

High-Torque Direct Drive Train:

Helical-bevel gearboxes coupled directly to TEFC motors deliver continuous output torque under full-load starting conditions.

Full-Opening Discharge Valve:

Pneumatically actuated bomb-bay or flush-bottom slide gate valves provide rapid discharge with zero dead pocket retention.

 

Technical Specifications

 

Parameter

Standard Model (RM-500)

Production Model (RM-2000)

Heavy-Duty Model (RM-5000)

Total Volume

700 L

2,800 L

6,800 L

Working Capacity

500 L

2,000 L

5,000 L

Batch Weight Capacity

300 kg

1,200 kg

3,500 kg

Agitator Speed

45 RPM

30 RPM

22 RPM

Drive Motor Power

11 kW

37 kW

75 kW

Trough Wall Thickness

6 mm

10 mm

14 mm

End Plate Thickness

10 mm

16 mm

22 mm

Product Contact Material

SUS304

SUS316L

SUS316L / Hardox Lining

Operating Pressure

Atmospheric (+/- 0.03 MPa)

Atmospheric (+/- 0.05 MPa)

Vacuum rated up to -0.09 MPa

 

Ribbon Blender Machine

 

Key Components

U-Shaped Trough: Laser-cut and roll-formed from certified plate stock, reinforced with exterior stiffening ribs to withstand internal torsional loads during high-viscosity phase transitions.


Ribbon Agitator Assembly: Precision-machined solid drive shaft holding laser-cut ribbon flights welded to heavy-duty radial support arms. Pitch and helix angles are calibrated to material particle size and friction coefficients.


Bearing & Housing Assemblies: Heavy-duty spherical roller bearings mounted externally away from the end plates, isolating bearings from thermal expansion and seal blow-by.


Pneumatic Discharge Valve: Flush-mounted butterfly, spherical segment, or bomb-bay valve contoured to match the exact internal radius of the trough, preventing product hold-up.


Top Cover & Access Ports: Flanged cover plate fitted with safety limit switches, dust-collection vent ports, liquid spray nozzles, and hinged inspection hatches with grid safety guards.

 

Applications

 

Dry Chemicals & Pigments:

Blending detergent powders, titanium dioxide, color masterbatch, ceramic slips, and agricultural pesticide carriers.

01

Food & Nutraceuticals:

Homogenizing flour mixes, protein powders, seasoning blends, milk powder, and dietary supplement excipients.

02

Battery Materials:

Dispersing lithium-ion cathode and anode precursor powders (LFP, NMC, graphite) with conductive carbon additives under controlled moisture environments.

03

Plastics & Composites:

Mixing PVC resin, calcium carbonate filler, lubricants, and thermal stabilizers prior to extrusion.

04

Construction Mortars:

Combining dry sand, cement, cellulose ether, and polymer additives for tile adhesives and self-leveling compounds.

05

 

Manufacturing Capabilities & Quality Assurance

 

• CNC Plate Processing: Plasma cutting and 4-axis CNC rolling ensure exact cylindrical tolerance along the 3-meter trough length, maintaining a uniform 2 mm to 4 mm tip clearance between the ribbon and trough wall.
• Automated TIG/MIG Welding: Structural and product-contact seams welded by certified operators following ASME Section IX procedures; root passes back-purged with argon gas for oxidation-free stainless joints.
• Dynamic Balancing: Agitator shafts dynamically balanced to ISO 1940 Grade 6.3 standards prior to assembly, minimizing harmonic vibration and extending seal/bearing service life.


Inspection & Testing Protocols:
Liquid penetrant testing (PT) on all internal product-contact welds.
Hydrostatic pressure testing of trough jackets at 1.5x working pressure.
4-hour dry-run factory acceptance test (FAT) measuring motor amperage draw, gearbox temperature rise, and shaft runout (tolerances held within 0.15 mm).
Regulatory Compliance: CE-certified electrical panels (IP55/IP65, ATEX zones available upon request), cGMP-compliant interior finishes, and FDA-compliant elastomer seals.

 

 

Customization Options

Thermal Jackets: ASME-stamped half-pipe or dimple jackets welded to the trough exterior for heating or cooling via steam, hot oil, or chilled water (0.4 MPa operating limit).


Liquid Addition Systems: Multi-nozzle atomizing spray bars pressurized via external metering pumps for uniform liquid fat, oil, or binder distribution.


Vacuum Deaeration: Reinforced trough construction with vacuum-rated shaft seals and vapor condensers for drying or degassing processes.


Material Upgrades: Product contact surfaces available in SUS316L, Titanium, Hastelloy C276, or tungsten carbide hard-facing on ribbon edges for abrasive silica applications.


Explosion Protection: ATEX-rated zone 21/22 motors, rupture discs, and nitrogen purge interlocks for combustible organic or metal dusts.

Industrial Ribbon Mixer

 

 
Delivery & After-Sales Support
 
01/

Packaging & Crate Standards: Export-grade fumigated wooden crates lined with VCI moisture-barrier film and desiccant packs; critical machined shafts coated with anti-corrosion wax.

02/

Logistics & Rigging: Shipped via 20ft/40ft open-top or flat-rack containers with integrated lifting lug certifications for crane offloading.

03/

Installation & Commissioning: Detailed English mechanical/electrical installation manuals, P&ID schematics, 3D plant integration support, and optional on-site supervision by senior service engineers.

04/

Spare Parts Availability: Critical wear items—including shaft seals, air purge regulators, V-belts, and valve seat gaskets—stocked in central distribution hubs for dispatch within 48 hours.

 

 

Frequently Asked Questions

 

 

Q: How is ribbon-to-trough tip clearance verified and adjusted?

A: Tip clearance is factory-set between 2 mm and 4 mm depending on particle size. The agitator shaft features precision-machined flanged couplings at the end plates, allowing shim adjustment or complete rotor alignment without cutting structural welds.

Q: Can this mixer handle materials that tend to agglomerate or form lumps?

A: For materials containing lumps or agglomerates, high-speed pneumatic or electric chopper assemblies (independent high-shear pin mills) can be flange-mounted through the lower trough wall. These run at 1,500 to 3,000 RPM to break down lumps independently of the low-speed ribbon action.

Q: Do you offer laboratory or pilot testing for customer material validation?

A: Yes. Our testing facility is fully equipped with pilot-scale ribbon mixers. We welcome clients to send representative material batches for pre-purchase mixing trials, complete with particle distribution analysis, discharge efficiency tests, and a detailed engineering verification report.

Q: What electrical standards and control architectures are supported?

A: Control panels are built to IEC or UL standards utilizing Siemens or Schneider PLC hardware and HMI touchscreens. Variable Frequency Drives (VFDs) are standard on main agitator drives to control starting torque and optimize blending speeds for materials with varying bulk densities.

 

modular-1
Request a Quote

To configure a Ribbon Mixer matching your exact bulk density, throughput, and material specification, provide the following parameters to our engineering team:
Material Name & Bulk Density (kg/m^3):
Required Batch Volume or Weight per Cycle:
Moisture Content & Flow Characteristics:
Product-Contact Material Requirement (e.g., SUS304, SUS316L):
Required Heating/Cooling Jacket or Vacuum Capability:
Electrical Supply (Voltage / Frequency / Phase):
Plant Integration Requirement (3D/2D CAD or Sample Testing Request):

As one of the most professional ribbon mixer manufacturers and suppliers in China, we're featured by quality products and good price. Please rest assured to buy cost-efficient ribbon mixer for sale here from our factory. Contact us for custom service and OEM service. ribbon mixer, Industrial Ribbon Mixer, Ribbon Blender Machine

whatsapp

Phone

E-mail

Inquiry